Where are walker downriggers made?
Company Description: Walker Downriggers Inc is located in Stayner, ON, Canada and is part of the Other Miscellaneous Manufacturing Industry.
Are downriggers worth it?
Downriggers are an efficient way to put live bait and lures in precise zones of the water column , and all anglers know that being in the right depth leads to more fish in the box. Downriggers are consistently used to target king mackerel, amberjack, cobia, grouper, among others.
How fast can you troll with a downrigger?
Most people troll at 1.5 to 3.5 mph How do you know if you are at the right speed? Sure, you can look at your GPS speed over ground readings, but you see your downrigger lines are almost straight at 2 mph.
What size downrigger do I need?
1. small boats (15 feet and under) are generally better off with a small compact downrigger with an arm length of 20 to 24 inches 2. Large boats (22 feet and up) are generally better off with longer arm downriggers with booms reaching from 30 inches to 48 inches or more.
Can you troll without a downrigger?
The secret to trolling without a downrigger is being able to replicate success That is why I highly recommend a level-wind reel with a built-in line counter. If you don’t have a line counter for your reel, just find a repeatable method to play out line. Another consideration when choosing a reel is spool size.
Where do you mount a downrigger?
Downriggers work best if they are mounted near the stern of the boat They will work at any location but the risk of tangling wire line in your prop during a turn is minimized the further back the downrigger is mounted. The downiigger should be mounted in a location where it is easy to reach and operate.
What does a downrigger snubber do?
Place between your downrigger terminal end and your weight. The scotty trolling snubber absorbs shock, provides electrical insulation and helps prevent snags Easy to grip with wet hands and allows for a simple and quick connection to your downrigger weight.
How much line do you need behind a downrigger ball?
For trout, you’ll want to run your offering from 50 to 200 feet behind the downrigger weight depending on the depth you are fishing. The deeper you fish the shorter your line can be. When kokanee and kings are the target you can shorten your lines considerably.
Are manual downriggers good?
Manual downriggers use a hand crank to retrieve cable. While they’ll give you forearms like Popeye if you’re trolling deep, they can be a great choice if you regularly troll above 75 feet.
What is a downrigger fishing rod?
A downrigger allows you to fish a lure or bait at a specific depth accurately behind a trolling boat A downrigger contains a rod holder for storing your downrigger rod when it is actively fishing. The cannonball weight is deployed to the selected depth and allows the lure or bait to run at a specific depth.
How many lines can you run off a downrigger?
Active Member. If you can run two downriggers with one line each and do it smoothly, then you should have no problem running 2 lines off each one Set up your first lines as you normally would. drop them 20′ and clip on your next line.
How deep can downriggers go?
“Most Cannon downriggers come with booms that you can adjust from 24 to 53 inches.
How fast do you troll for chinook salmon?
Two mph is a good trolling speed for coho salmon, but a speed of 1.5 mph is a better speed for chinook salmon, and you will be fishing even deeper at the lower velocity.
What is the best weight to use on a downrigger?
Six to eight pounds is typical for most moderate depth freshwater applications and ten pounds is typical for saltwater (see Weight Table). The amount of weight needed on a downrigger is a function of the speed you are trolling and the depth you are fishing.
How far behind the boat should I troll?
Bait Position and Distance Behind Boat Proper distance for most boats will be anywhere from 20 feet to 150 feet behind your boat. Whether you have inboard diesel or outboard gas engines, your power dictates the distance you troll your baits and lures.
How much line do you let out when trolling?
Let out 50 feet of line and clip into the release. If that’s not enough distance to prevent your lake’s wary walleyes from seeing the ball.then let out 150 feet of line! Just remember, the flat-line diving depth of your crankbait still applies behind the ball!.
What is a good speed for trolling?
The best trolling speed depends on several factors including the type of fish, water conditions and lure choice. In general, trolling speeds between 1.5 and 2.5 mph , as measured by GPS, are a good starting place for most species like walleye, trout and salmon.
Are downrigger mounts Universal?
The DR universal downrigger mounting base is drilled and tapped to accept a wide variety of downriggers such as Scotty, Big Jon, Walker, Cannon and others.
How do you use a Scotty weight snubber?
The Scotty Trolling Snubber attaches between your downrigger cable and weight. Connect your downrigger line to the welded ring of the Sampo ball bearing swivel and clip your weight to the other end using the trolling snap , and this snubber will absorb shock, provide electrical insulation, and help prevent snags.
How fast should you troll for lake trout?
It is common practice to troll for lake trout at a speed of 1.5 mph In fact, this is actually an effective trolling speed for lakers, when the fish are in deep water.
What line do you use for trolling lake trout?
30-40 lb braid with about a 12′ fluorocarbon or monofilament clear leader is the preferred line set up. 17-20 lb monofilament line throughout can also be substituted if preferred.