What is K Guide in Rod?
Fuji have developed the K guides to offer tangle free long casting performance on both shore and lure fishing rods The KWAG guides are well suited to fixed spool and multiplier fishing reels and the precise angle of the guide smooth the line flow for longer smoother casts with both braid and nylon fishing lines.
What are tangle free guides?
The new K-Series has been designed to untangle itself of wind knots, etc without angler intervention The K-structure works against tangles whether you use a high frame type, or upward at casting.
What is Fuji SiC?
SiC has been the “gold standard” of guide ring material for over 20 years. It’s the best heat dissipating ring in Fuji’s lineup and because of this, SiC Guides are particularly well suited for light drags and/or big fish.
Are aluminum oxide guides good?
Alconite is a guide material whose base is aluminum oxide. It offers exceptional smoothness and durability but at a lower cost than silicon carbide.
Where are Fuji rod guides made?
It was at that time that the company moved into its current location in Studley, Warwickshire At that time the company 100% manufactured rod guides for manufactures and wholesale distributors.
What is Fuji FazLite?
Fuji FazLite Rings FazLite rings are braid-proof, super tough, and smooth as silk and come in between the pricing of ALCONITE and Concept “O” rings. They are available in all K-Series frames from KT to KL-H and the all-new CC Corrosion Control frames.
What is FazLite?
Fuji FazLite rings are an all-new formulation designed for braid proof, rod locker tough, and smooth as silk performance on your fishing rod Just shy of Alconite’s stellar specifications, FazLite rings are the most affordable yet easily surpass the performance demands set with Fuji’s flagship K-Series guides.
How do you measure a rod tip?
The tip-top tool also has holes which you can place the rod blank through to obtain the diameter. Both of these methods will give you the tube size of the tip-top. Using a digital caliper to measure the outside diameter of the ring is the best possible method of accurately determining the ring’s size in millimeters.
How do you measure a fishing rod guide?
When it comes time to size a replacement, guides are measured by the outside diameter (OD) of the ring in millimeters —or, if the ring is missing you can use the inner diameter (ID) of the guide opening.
Can you use braided line with aluminum oxide guides?
Aluminum oxide rings developed 40 years ago are fine today, even for braided polyethylene line Assuming the frames are stainless steel, a thorough freshwater rinse and towel-dry should stave off corrosion for many seasons.
Can you use braid with aluminum oxide inserts?
Lightweight and durable without sacrificing any hardness, guides with Alconite inserts are among the most popular inserts with an Aluminum Oxide base. Handling braided lines and super lines , Alconite is considered a very versatile guide material.
How many guides should a fishing rod have?
The second thing you should pay attention to is the number of guides. For example, a 7′ rod can have anywhere from 6–9 guides. As a rule of thumb, the more guides a rod has, the better More guides will distribute stress on the line and rod more evenly, and allow you to cast with more precision.
What is a fuji reel seat?
The Fuji TVS Reel Seat is a cool and comfortable mechanism that boosts fishing performance while reducing fatigue This spinning reel seat introduces a special three-channel grooving within the barrel threads to ensure a smooth and secure fit for all four possible hood options.
How are snake guides measured?
Taking the measurement of the butt section just above the cork with a caliper and reading the flat to flat or apex to apex of both sides of a round blank and refer to the sizing chart.
What size are micro guides?
Basically, micro guides are considerably smaller than the conventional guides found on today’s casting rods. They average about 4mm in diameter (some are even smaller) and all the guides on a rod are usually the same size.
What is power for fishing rod?
The “power” of a rod refers to how much pressure it takes to flex the rod Different rod powers are engineered to efficiently handle a certain range of lure weights and line sizes.
How do you size a tip top?
To make things interesting, the tube size is represented by 64ths of an inch The tube measurement you see when purchasing a tip-top is actually the numerator over 64ths of an inch. For example, common tube sizes range from 3.5 to 12, but remember this actually means they range from 3.5/64ths to 12/64ths of an inch.
Citations
https://www.guidesnblanks.com/c/rod_guides/guides/fuji/k_series_tangle_free
https://anglersresource.net/tips-tricks/demystifying-the-k-series-guide/
http://www.tackletour.com/previewfujikseriesguide.html
https://www.youtube.com/watch?v=4FJEUqkONpM
https://www.veals.co.uk/acatalog/Fuji-KWAG-Alconite-K-Guide-4852.html