How Fast Should You Troll Crankbaits?

Changing speeds is key Typical crankbait trolling speeds are 1.5 – 3 mph , and there are times when it makes a big difference. If you are marking bait and fish but not hooking up, don’t be afraid to speed up or slow down. Making “S” turns is also a good way to test several speeds at once.

How fast do you troll crankbaits for walleye?

What Speed Should You Troll For Walleye? It depends on the time of year and water temperatures. Trolling speed, in the spring, is best at 1.3 – 1.5 mph Summer trolling speeds increase 1.5- 2 mph as walleyes are more active in warmer water temperatures.

How far behind the boat should I troll?

Bait Position and Distance Behind Boat Proper distance for most boats will be anywhere from 20 feet to 150 feet behind your boat. Whether you have inboard diesel or outboard gas engines, your power dictates the distance you troll your baits and lures.

How fast do you troll with a Rapala?

“We troll at two miles-per-hour and all we catch is white bass and sheephead,” Holst explains. “We throw a little speed at these fish, and all we catch is walleyes.” Lots of walleyes.

How much line should you let out when trolling?

Let out 50 feet of line and clip into the release. If that’s not enough distance to prevent your lake’s wary walleyes from seeing the ball.then let out 150 feet of line! Just remember, the flat-line diving depth of your crankbait still applies behind the ball!.

What weight should I use with crankbaits?

For most applications the best fishing line for crankbaits, especially for beginners, is 8 pound test monofilament.

Can you troll a jerkbait?

Traditionally, bass anglers cast jerkbaits while walleye anglers troll them, spring and fall Both types of anglers want to cover water. Trolling jerkbaits along riprap or over shallow sand, gravel and rock contours catches big walleyes every year.

What lures to use trolling for walleye?

The three basic types of walleye trolling lures are plugs, spinners, and spoons Plugs are by far the most popular for a couple of reasons. Plugs can be purchased with lip sizes that result in them diving down to a determined depth.

Should I use a swivel with crankbait?

Never use a swivel or angled snap when fishing crankbaits This type of terminal hardware makes it more difficult to tune lures. Even worse, avoid tying crankbaits directly to the fishing line using common knots like the clinch.

Do snap swivels scare fish?

Although snap swivels can save you time, they’re too big and bulky and will most likely scare off the fish either by their unnatural look, or just their presence in the water Sure, you might catch a few young, naive, aggressive with it, but if you want to maximize your chances of catching fish, it’s not a good idea.

Do you use a leader for crankbaits?

Crankbaits (Including squarebills, mid range, and deep diving crankbaits). No Leader needed and never use fluorocarbon for floating baits. -Never use Fluorocarbon for Topwater Techniques.

What speed do you troll for bass?

It takes a bit of experimenting to get the speed right, but for typical bass crankbaits it’s anywhere from 2 to 4 mph –you can tell prime speed because that’s where the rod bows up most.

How deep will walleye go?

Walleye are generally caught between 10-40 Ft A typical mid-sized lake in the Midwest would likely hold Walleye between the depths of 10-15 Ft. during the Spring, 15-25 Ft. transitioning to Summer, 25-40 Ft.

How can you tell how deep a crankbait will dive?

The first thing you will notice about crankbaits is the lip or bill on the front of each one designed to plane through the water and get the lure down in the water column. The diving depth of the lure can be roughly determined by the size of the bill; the bigger and longer, the deeper it will dive.

What size snaps for crankbaits?

Fish snaps work really well. In #1 and #2 , excellent sizes for most crankbaits, you’re talking about breaking strengths of roughly 40 and 55 pounds, respectively.

Is it better to troll with the current or against it?

The proponents of ‘Against the current’ say that *both* the bait fish and salmon will almost always face into a current. The salmon is parked, waiting for bait to swim by and become a tasty meal. Wanting to mimic nature, the best presentation results from trolling Against the current.

Should you troll with or against the wind?

When trolling in large waves, obtaining the best boat control boils down to two things: Always troll with the wind , and, use accessories to take the surge out of the boat. Trolling with the wind is the most important.

Should I troll with or against the tide?

Most species can be caught by trolling both with the tide and against it However, trolling upcurrent has worked better for me, probably because it gives me better control over the boat and the lure. Also, most fish face into the current.

Do you use a swivel with a Rapala?

Rapala recommends tying directly , but what I learned was to use a snap (no swivel, just a snap) with most any crankbait because it can actually help facilitate the crank’s movement. Snap without a swivel here too. All Rapalas that wander are not lost.

How do you rig a Rapala lure for trolling?

To cast or troll in deep water, use a three-way swivel rig Attach one swivel ring to your line and your lure to another swivel ring using 7 feet (2.1 m) of either monofilament or special fluorocarbon leader. Attach 3 feet (0.9 m) of line to the third ring, with a 3-ounce (85 g) bell or dipsey sinker at the other end.

Does trolling speed affect lure depth?

Trolling slightly faster or slower , the wind pushing the boat sideways, waves rocking the boat (tugging back and forth on the lures), underwater currents, water temperature, line diameter, variations in the lures (even though they look identical) and other factors all combine in very complex ways to affect a lure’s.

Is mono or braid better for trolling?

Mono holds knots better and costs less than braid It also works better on smaller bait-casting reels because light braid can dig into itself. Florida sailfish and dolphin anglers still use a lot of mono on the troll, and some use it for kite lines because it runs through the clips better.

What is the best size rod for crankbaits?

If a 40 yard cast with a big, deep-diving crankbait like the Berkley Dredger is critical to your catch, your rod should be at least 7 feet long , and you’ll want a smooth reel and a line with a slim diameter.

When should you throw a crankbait?

Late fall and early spring when bass roam the shallows are ideal times to throw a square bill crankbait. The short bill crankbait can be slowly cranked through shallow brush when the water is still cold in the early spring.

Do crankbaits have to hit bottom?

Let the bait sink to the bottom. Jig it a few feet off the bottom and let it flutter down Anglers can even vertically jig lipless crankbaits like a chrome spoon. In late winter or early spring, many anglers burn lipless crankbaits just under the surface around patchy vegetation.

Is trolling for bass effective?

Yes. Trolling for bass with crankbaits, swimbaits and spinnerbaits is a highly effective method for efficiently locating bass holding to deeper structure or along submerged weed lines While trolling for largemouth may be against the rules in tournaments, it is fair game for the casual angler.

Is trolling a good way to fish?

Trolling is arguably one of the most effective ways to catch fish Not only does it fill the cooler, but it’s equally exciting for beginners and experts alike. Trolling may be one of the most popular fishing techniques out there, but there seems to be a belief that it has a lot to do with luck.

What is the difference between crankbait and jerkbait?

Crankbaits are generally shorter and fatter, while jerkbaits are slender and longer Jerkbaits mostly have three treble hooks, while crankbaits have two. The most common types of bills for both jerkbaits and crankbaits include square bills, diamond-shaped bills, and rounded bills.


You May Also Like