How Do You Make A Jon Boat Into A Bass Boat?

What size trolling motor do I need?

boat weight is the most important consideration to take into account when choosing a trolling motor. A beginning rule of thumb is that you want a minimum of 2 lbs of thrust for every 100lbs For example, if you have a 3000lb boat, fully loaded, then the calculation is (3000/100) * 2 = 60lbs of thrust.

How much does a 10ft jon boat cost?

A 10ft jon boat is the most basic of jon boats, offering a no-frills economical means for the sportsman to get on the water. Initial purchase prices range from $550-800 but will generally only include the hull itself.

What’s the biggest jon boat?

Built for a Lifetime SeaArk is well known for creating the World’s Largest Jon Boat in 1994 at 24 feet long and 72” wide It has since upped the ante by creating a 26-foot jon boat. In addition to toting the title of World’s Largest Jon Boat, SeaArk Boats can also claim the title of the #1 Catfishing Boat.

How are casting decks measured?

Determine the shape of the casting deck Cut out a piece of carboard that is slightly smaller than the deck area that can easily fit inside the boat. The easiest way to do this is measure the length of the front bench and the bow, then measure the distance from the front of the boat to the seat.

How thick should Plywood be on a boat floor?

3/4 would seem plenty on a boat that size, it’s usually 1/2 or 3/4. I used 3/4 on the floor of my CC it’s very solid and is what I would use on your project.

What is Coosa board made of?

The Coosa Advantage Our specialized panels are constructed with high-density, closed-cell, polyurethane foam impregnated with layers of fiberglass to serve as a strong, reliable alternative to plywood and other traditional unreinforced core materials.

Can you build your own bass boat?

They are designed to fish for black bass but can be used for any freshwater fishing. Although bass boats are usually made from fiberglass or aluminum, a homebuilder can build a bass boat from marine plywood Building a bass boat is a challenging project, but it can be accomplished by many home builders.

How do you make a wooden boat step by step?

  • Step 1 – Collect all materials and tools
  • Step 2 – Plan the boat
  • Step 3 – Create the center rib and transom
  • Step 4 – Create the shape or frame
  • Step 5 – Add the finer details of the frame
  • Step 6 – Add the Seat Rails, Keel Strip, Sand and Patch
  • Step 7 – Add the wood planks and seats.

Where are Phoenix bass boats made?

Witness top-of-the-line bass boats being built in our Winchester, TN facility. You’ll see superior materials and master craftsmanship meet in various steps of the boat building process, resulting in the creation of bass boats with unparalleled fishability.

How deep should my trolling motor be in the water?

A trolling motor’s ideal propeller should be at a depth that keeps about 6 inches of water above the blades In other words, the centerline of the motor and the prop shaft should be about 12-18 inches below the waterline, depending on the make, model and dimensions of the trolling motor.

Can you have too much thrust on a trolling motor?

You can never have too much thrust and go with a variable speed. Not only is it more useful it also helps battery life. The one place that many people try to save money is on the electric trolling only to regret it.

How fast will a 55 lb thrust trolling motor go?

Assuming perfect riding conditions, the use of the best fuel i.e. the distillate marine diesel, and moderate load, 55-pound trolling motors are likely to attain a maximum speed of only 5 miles per hour.

How do you make a jon boat sturdy?

Adding buoyancy to your Jon boat means enhancing its floating ability in the water, which improves the stability of the boat. Buoyancy helps decrease the effect of the heavy load on the boat.

Can you build your own jon boat?

Flat-bottomed Jon boats are not only a fun and easy DIY project to tackle , but they’re also the perfect design for navigating shallow waterways. If you want to make one yourself, this plan tells you how to do it using only inexpensive materials.

Can I use pressure treated wood on my aluminum boat?

How can I have pressure treated plywood in my aluminum trailer without corrosion? The Short Answer: A Barrier Membrane between the aluminum and pressure treated plywood. As long as the aluminum is not directly touching the pressure treated plywood, you will not experience any corrosion or reaction between the two.

Is pressure treated wood safe for aluminum?

Does Treated Wood Corrode Aluminum? Yes. Most of the new chemical treatments contain copper and should never come in direct contact with aluminum Total failure caused by corrosion can occur in less than a year.


You May Also Like