How Do Snap Weights Work?

Basically the snap weight system works by allowing the angler to determine lead, the distance the lure or bait is let out the back of the boat. Once this is established the snap weight is simply pinched open and attached to the line.

How deep can you troll with snap weights?

Snap weights can also be used to prevent lures near bottom in 20 to 50-feet of water. The amount of weight needed to fish in deep water varies depending on the water depth and trolling speed. Snap weights rigged with 4, 6, and 8 ounce weights are adequate for waters up to 50-feet deep.

What weights to use for trolling?

Use 3oz weight for 30′ and shallower trolling, 4oz for trolling to 40′ depths.

What is the 50 2 method for trolling?

The 50 Plus 2 Method starts by selecting one of the 16 crankbaits currently available with Snap Weight data and letting that lure back the designated 50 foot as a fixed leader. Next the two ounce OST Guppy Weight is attached to the line.

How do I make my lures deeper when trolling?

If you need to go deeper, just let out some backing until your target depth is reached On the lure end of the line, remove a short section of lead as before and tie on a size 18, or smaller, barrel swivel. Now use a 10 to 15 foot mono or fluorocarbon leader to tie on the lure.

Do you use weights with crankbaits?

The answer is no. There is no need to use a weight or anything else with a crankbait Just tie it on to the end of your line and you’re good to go!.

What is a trolling sinker?

A great sinker that takes bait rigs down to the deep feeding zones of big fish Attach your line to one end and a leader to the other, and your bait will stay right in the zone. Available in a variety of shapes from cigar to keel with bead chain and swivel or without and sizes ranging from 1/2 ounce to 5 ounce.

What is a split shot sinker?

Split shots are one of the most well-known and frequently used sinkers They come in sizes from that of a BB to larger ones about the size of a raisin. They feature a groove that runs the full length of the sinker. This opening holds the line once the sinker is pinched in place.

How much does the precision trolling app cost?

The LifeTime purchase option costs $109.99 and includes all the data currently available from Precision Trolling Data, LLC and all subsequent freshwater data to be published in the future. Downloading the PTD app to your phone is a simple process.

How far behind the boat should I troll?

Bait Position and Distance Behind Boat Proper distance for most boats will be anywhere from 20 feet to 150 feet behind your boat. Whether you have inboard diesel or outboard gas engines, your power dictates the distance you troll your baits and lures.

How much line should you let out when trolling?

Let out 50 feet of line and clip into the release. If that’s not enough distance to prevent your lake’s wary walleyes from seeing the ball.then let out 150 feet of line! Just remember, the flat-line diving depth of your crankbait still applies behind the ball!.

How fast do you troll crankbaits?

Typical crankbait trolling speeds are 1.5 ā€“ 3 mph , and there are times when it makes a big difference. If you are marking bait and fish but not hooking up, don’t be afraid to speed up or slow down. Making ā€œSā€ turns is also a good way to test several speeds at once.

What speed should you troll for walleye?

The magic speed for walleye is somewhere between 1.8 to 3.5 miles per hour , about the pace of a fast walk or slow jog. The best trolling speed varies widely based on lure type and water temperature. Rod placement is another important aspect of trolling that a lot of anglers neglect.

How deep will walleye go?

Walleye are generally caught between 10-40 Ft A typical mid-sized lake in the Midwest would likely hold Walleye between the depths of 10-15 Ft. during the Spring, 15-25 Ft. transitioning to Summer, 25-40 Ft.

Do crankbaits have to hit bottom?

Since wide wobbling crankbaits best imitate crawfish, you should crank your plug down to the bottom to deflect it off the rocks Retrieving a thin-sided crankbait at high speeds triggers strikes from prespawn bass on clear-water lakes when the water temperature rises into the low 50s.

Is braided fishing line good for trolling?

What Braided Fishing Line Should I Use? Braid is great for trolling but since it has very little stretch we recommend using a wind-on-leader or mono tophsot. We recommend using 30-130Lb braid as backing for trolling reels. Make sure any reel you spool on your trolling reels is spooled on tight!.

Can you troll with an ultralight rod?

Designed specifically for anglers who troll for kokanee salmon and trout , Lamiglas Ultra Light rods offer dependability and performance when casting or trolling for a variety of species.

Can you troll with a spinning reel?

Today’s spinners can stand up to heated runs and drag pressure more than they were capable of a few decades ago. So yes, you can use a spinning reel for trolling !.

What is a split shot sinker?

Split shots are one of the most well-known and frequently used sinkers They come in sizes from that of a BB to larger ones about the size of a raisin. They feature a groove that runs the full length of the sinker. This opening holds the line once the sinker is pinched in place.

Citations

https://reviewyourgear.com/best-snap-weights-for-trolling/
https://fishingaddictiongear.com/products/snap-weight-2-oz
https://www.youtube.com/watch?v=Ih91F1PJdi4
https://www.snakebitesnaps.com/

You May Also Like