Are Downrigger Mounts Universal?

The DR universal downrigger mounting base is drilled and tapped to accept a wide variety of downriggers such as Scotty, Big Jon, Walker, Cannon and others.

Where is the best place to mount a downrigger?

Anywhere between the gunwale mounted rod holders will be fine. If you place them not too far forward of rod holder #2, you can put the rod (or one rod) in rod holder #2 while it is clipped onto the downrigger. You should never have to bend and lean to reach a downrigger.

What are the four basic accessories needed to fish with a downrigger?

Downriggers consist of four major components, the weight, cable, pole or boom, and the spool A fishing line is attached to the downrigger cable by means of a “line release.” The weight is normally a five-to-twenty-pound mass of lead which is connected to the stainless steel cable.

What is a gimbal mount on a boat?

Product Overview. SCOTTY 9″ Gimbal Mount fits into a boat’s flush mount rod holder and eliminates drilling holes and leaving permanent downrigger mounts on the boat Made from welded stainless steel and modified nylon for the ultimate in strength and durability.

How fast can you troll with a downrigger?

Most people troll at 1.5 to 3.5 mph How do you know if you are at the right speed? Sure, you can look at your GPS speed over ground readings, but you see your downrigger lines are almost straight at 2 mph.

Who owns Cannon downriggers?

Today, Cannon downriggers are part of the Johnson Outdoors family , and they’ve evolved into high-tech tools that push the innovation envelope.

What weight downrigger should I use?

Six to eight pounds is typical for most moderate depth freshwater applications and ten pounds is typical for saltwater (see Weight Table). The amount of weight needed on a downrigger is a function of the speed you are trolling and the depth you are fishing.

Are downriggers worth it?

Downriggers are an efficient way to put live bait and lures in precise zones of the water column , and all anglers know that being in the right depth leads to more fish in the box. Downriggers are consistently used to target king mackerel, amberjack, cobia, grouper, among others.

What is a downrigger rod?

A downrigger allows you to fish a lure or bait at a specific depth accurately behind a trolling boat A downrigger contains a rod holder for storing your downrigger rod when it is actively fishing. The cannonball weight is deployed to the selected depth and allows the lure or bait to run at a specific depth.

Are manual downriggers good?

Manual downriggers use a hand crank to retrieve cable. While they’ll give you forearms like Popeye if you’re trolling deep, they can be a great choice if you regularly troll above 75 feet.

Are Cannon downriggers Made in USA?


Do you need a downrigger to troll?

The secret to trolling without a downrigger is being able to replicate success That is why I highly recommend a level-wind reel with a built-in line counter. If you don’t have a line counter for your reel, just find a repeatable method to play out line. Another consideration when choosing a reel is spool size.

How does a gimbal mount work?

The gimbal uses the IMU to detect any sudden jolts or movements of the person holding the camera These motions are canceled out on the gimbal by powering the three brushless motors to keep the gimbal stabilized within milliseconds of unwanted motion.

What is a gimbal rod?

The gimbal gives your rid something to lock into when fighting a bigger fish such as a chair or belt or the gunwhale rod holder.

How much line do you need behind a downrigger ball?

For trout, you’ll want to run your offering from 50 to 200 feet behind the downrigger weight depending on the depth you are fishing. The deeper you fish the shorter your line can be. When kokanee and kings are the target you can shorten your lines considerably.

How many lines can you run off a downrigger?

Active Member. If you can run two downriggers with one line each and do it smoothly, then you should have no problem running 2 lines off each one Set up your first lines as you normally would. drop them 20′ and clip on your next line.

What is blowback on a downrigger?

Blowback is the angle or horizontal distance between your downrigger weight and your downrigger It is created by the resistance of the water to the downrigger weight and line as you pull it through the water behind your boat.

How does Cannon downrigger auto stop work?

When the downrigger cable is in the water, a small electrical current flows between the cable and grounded metal boat components in the water. When the cable clears the water, the current flow stops. The short stop system senses this interruption and turns off the motor.

What is positive ion control?

WHAT IS POSITIVE ION CONTROL? Positive Ion Control is a feature on all Cannon electric downriggers Your boat’s electronics create a fish-repelling negative energy field in the water. Positive Ion Control neutralizes the negative energy field so fish will stick closer to your line.

What depth do you troll for salmon?

Two mph is a good trolling speed for coho salmon, but a speed of 1.5 mph is a better speed for chinook salmon, and you will be fishing even deeper at the lower velocity. With 50 feet of line out, you would be 44 feet deep at a velocity of 1.5 mph – not the 37 feet deep at 2 mph.

How fast should you go when trolling?

The best trolling speed depends on several factors including the type of fish, water conditions and lure choice. In general, trolling speeds between 1.5 and 2.5 mph , as measured by GPS, are a good starting place for most species like walleye, trout and salmon.

How deep can you fish a downrigger?

A downrigger weight of eight pounds is adequate for fishing depths up to about 50 feet and speeds approaching 2.5 MPH. A 10 pound weight will be required for fishing depths in the 50 to 75 foot depths. When faced with depths ranging from 75 to 100 feet, a 12 or 14 pound downrigger weight is needed.

What does a downrigger snubber do?

Place between your downrigger terminal end and your weight. The Scotty Trolling Snubber absorbs shock, provides electrical insulation and helps prevent snags Easy to grip with wet hands and allows for a simple and quick connection to your downrigger weight.

Can you use a spinning reel with a downrigger?

Spinning reels tend to twist your line when used for a trolling reel. Which is why a person uses a quality ball bearing swivel. And Yes spinning gear is fine and the baitrunner feature makes using it on the downrigger very easy.


You May Also Like